Ghost 2 Immobiliser Installation
The ghost 2 immobiliser installation is a straightforward and effective way to secure your vehicle from theft. It is directly connected to your vehicle's CAN network and is almost undetectable.
Locate a source of constant power as well as a point of grounding. It is crucial to have these wires properly insulated to prevent electrical shorts.
The prevention of theft
The Ghost 2 Immobiliser creates a unique PIN code using the electronic buttons on your steering or the centre console. This ensures that only you will be authorized to start your car. This means that even if thieves manage to steal your keys or hack your car's systems, they won't be able to get your vehicle moving. It's also completely quiet and unnoticeable by anyone who tries it out So you can rest at ease knowing that no one will notice that you've added an extra layer of security.
Another reason why it is so effective in stopping theft is the ability to stop your engine even if a thief is able to break into. This is achieved by utilising a secondary device called the Shadow which is connected to your car's CAN data system and does not communicate over radio frequency, making it difficult for thieves to locate or tamper with. Additionally it is possible to connect the Shadow can be connected to a tracking/paging device to allow you to keep track of your vehicle's movements. Additionally, it also has an output that can activate an alarm (if authorised) when someone is trying to steal the vehicle.
When working with wires, it is important to work in an area that is well-lit. This will allow you identify the right wires and avoid any accidental short circuits or disconnections. It is also essential to double-check and test the connections, and to insulate the wiring to shield it from the elements. It is also recommended to use cable ties to bundle and secure the wires, which will enhance their appearance and decrease the possibility of them getting ripped off in the course of the operation of a vehicle.
It's also a good idea to mark the CAN H and L wires with labels or tape. An incorrect identification of their location could cause an electrical surge that could damage the immobiliser. It is also a good idea to test the identified power source and grounding point with an instrument to ensure that they are providing a steady 12V power supply and a stable grounding.
Easy to use
Ghost immobilisers can help you keep your vehicle secure from theft. It stops key cloning, ECU swapping and other security risks, and can be linked with an iPhone application for simple control and monitoring. The app also sends alerts if your car is compromised. It will also assist you to locate your car when it is stolen.
The Ghost immobiliser is operated without any special equipment. It's connected to your vehicle's CAN system and programmed with a specific PIN code you choose. You can activate it by using the series buttons on your dashboard, steering wheel, or the WeCar application. The code must be entered to start the engine, so thieves cannot just turn on your car and leave.
Installing a ghost immobiliser is simple, but it's crucial to follow the directions carefully to ensure that it is a seamless integration with your vehicle's current systems. The first step is to unplug the battery. This will prevent accidental airbag deployment and ensure safety. It's also important to work in a well-lit area to make accurate connections and avoid making mistakes. It's also crucial to use appropriate soldering techniques or top-quality connectors to ensure a strong and solid connection.
The CAN H and L wires are essential to connect the Ghost immobiliser to the wiring of your vehicle. Use a wiring diagram to identify these wires. Then, locate the best place to connect them. Mark these wires using labels or tape to aid in identifying them when installing.
It's a good idea to test your immobiliser after connections have been made to ensure that it works correctly. You should also test the Transport Mode which disables the Ghost System and allows you temporarily to disable your security functions. This is particularly helpful for scenarios like vehicle transportation or servicing. This feature is particularly useful when you own an older vehicle that needs its battery to be isolated for servicing.
Low-profile
A ghost immobiliser is used to prevent theft from vehicles with keyless entry. It works by capturing the vehicle's remote control signal and constructing a barrier that thieves can't breach it without the proper PIN code. It's a secure and discreet way to protect your vehicle and insurance companies recommend it to reduce monthly cost of insurance. It's a low-profile, hidden system that can be found within your car's buttons. It doesn't have LED indicators and is therefore virtually undetectable by thieves.
The Ghost immobiliser, unlike other security systems is connected to the CAN data network of your vehicle, not a remote control. This means that thieves will not be able to detect or disable the device through wire cutting, and it's secure against tampering. This makes it harder for thieves to take your vehicle. It's also an excellent option for older cars that do not have a keyless entry system.
The installation of a ghost immobiliser could be done by an expert or you can do it yourself using the right equipment and materials. You'll need basic hand tools and a multimeter to test electrical values, as well as insulation tape or cable ties to make sure that your connections are secure well-insulated. Before you start your engine, you must disconnect your battery and make sure that all wiring is properly bundled. This will prevent thieves from tampering with the wiring.
You can ask an authorised shop to install your immobiliser if you aren't confident doing it yourself. They'll handle the entire procedure starting with the initial inspection through to the installation. If anything goes wrong, they will offer a guarantee. They'll answer any questions about the immobiliser, and also help you determine if it's the best option for your vehicle.
The Autowatch Ghost 2 is a smart immobiliser that integrates directly with your car's ECU. This helps to protect against hacking, key cloning, and relay attacks that are commonplace in modern vehicles. It's TASSA certified and provides superior protection against theft So you can rest assured that your vehicle is secure while driving it.
TASSA verified
The Ghost immobiliser is one of the best ways to safeguard your car from theft. It connects to the CAN data network in your car and uses it to prevent your engine from starting without your PIN number. The system is undetectable by thieves and is a great alternative to a car alarm. You can change your PIN at any time, and only you know it. This guarantees the security of your vehicle.
A TASSA verified installer will complete the installation of the Ghost system within a few hours at your home or at your place of work. You will also receive a complimentary emergency card, installation certificate, and owner's manuals. They will also show the device to you and ensure that you are happy with the service.
The Ghost, unlike other immobilisers, can connect directly to the CAN data network of your vehicle. This allows it to be fitted without cutting any wires. It is also very quiet, making it hard to detect by thieves. The system is programmed with a an individual PIN code that you can change, which you can enter using the buttons on your dashboard or steering wheel. This blocks anyone from starting your vehicle even if they have the key fob.
If you're ready to install an immobiliser ghost 2 first, you must begin by disconnecting the battery. This will avoid any airbag deployments or short circuits during the process. Once the battery has been disconnected it is recommended to follow the instructions in the user's manual to connect the immobiliser. It is also recommended to consult online resources for additional guidance specific to your vehicle's model.
ghost immobilisers should test the immobiliser after completing it to ensure that it is working properly. You can perform this by entering the PIN code, then trying to start the vehicle. After this you must conduct regular checks to ensure that the immobiliser working correctly. This will help you identify any issues early so that you can address them quickly.