How to Install a Ghost Immobiliser
A ghost immobiliser protects your vehicle from key cloning or hacking. It prevents the engine from starting until a PIN code has been entered. It can be as long as 20 characters.
It is unnoticeable by thieves, who are unlikely to expect this extra layer of security. Certain systems also come with an application that lets owners disarm the immobiliser in case they forget their PIN or to use the service/valet mode.
Connecting to the vehicle's CAN bus
The Ghost 2 Immobiliser is a cutting-edge security system, can be integrated directly into the ECU of your vehicle. It offers a discrete barrier against thieves. It is extremely efficient and user-friendly. This makes it a valuable asset to your vehicle's security arsenal. Like all anti-theft devices, it's not foolproof and requires regular maintenance to function properly. This guide will help you get the most of your Ghost 2 immobiliser.
CAN (Controller Area Network) is a robust serial network that allows microcontrollers to communicate with one another over short distances without the need for a central control unit. It is designed to multiply electrical wiring in vehicles, thereby saving on copper. It has numerous advantages including the low cost and ease of use.
The CAN protocol is utilized in the majority of modern vehicles to communicate with the engine management system, steering control module, air conditioning controls, and many more. It also carries sensor data like speed sensors and inputs to control various features of the car. The CAN bus is used to monitor these different components, and can prevent the vehicle from starting if they're in a dangerous state.
While the CAN bus can be used for a variety of purposes, it's crucial to know how it functions and how it's secured. The CAN bus is a great way to add new features to your vehicle, but it's also essential to secure it from threats such as hackers and other. The best method to achieve this is to install a firewall and monitoring your CAN bus through software.
Ghost2's control unit is hidden in the dashboard of the car or in the wiring harness, preventing thieves from physically tampering with it. It's also impossible to reset the PIN or emergency code without access to the vehicle.
If you have to surrender your vehicle for maintenance, valet parking or for any other reason, you can turn on the Transport Mode. This feature will disable both the keyfob and the ignition functions of the Ghost immobiliser. It will only reactivate after the car has reached 31 mph over a period of 15 minutes.
Making an PIN code
The Ghost immobiliser guards your vehicle from thieves. The cutting-edge technology uses a PIN code to shut down the engine and block it from starting if you do not have the proper code or an authorized fob or mobile device. The system's discrete design makes it virtually invisible and also provides unbeatable protection against theft. The system is TASSA-verified and could save you substantial sums on your car insurance.
During installation, Ghost enters a "learning mode" to record the sequences of buttons that are pressed to generate your unique pin codes. The installer will guide you through activating the system once the pin code is created. Once activated, the Ghost system disables the vehicle's start motor unless you enter a valid pin or switch the vehicle to transport mode. ghost immobiliser birmingham makes it extremely difficult for thieves to duplicate or hack your vehicle's starter system.
Installing an Ghost immobiliser is simple, but it is important to follow the precise instructions in the user's manual to ensure that it operates properly. Hand tools are essential in making precise connections, and a multimeter can help you verify the electrical value. Insulation tape, heat shrink tubing, and cable ties are a good option to shield exposed wiring. Check the system on a regularly basis to detect any potential issues.
Once the installation is complete, it is important to perform a final check of the system prior to switching on the ignition of your vehicle. Ghost immobilisers will arm themselves after 3 to 30 seconds, depending on the model of your vehicle. The system also has an option for Service/Valet that allows you to temporarily disable the system while servicing your vehicle or valet parking.
Ideally, the immobiliser should be hidden in an inconspicuous location under the steering wheel or dashboard. Make use of a small piece of duct tape or paint on the wires CAN H and L to make them easier to locate when testing. In addition the CAN H and CAN L wires must be connected to a source of power that has continuous 12V. It is also essential to check the connections following testing, as misidentifying these wires can cause the system to malfunction.
Invoking the system
A ghost immobiliser stops your car from starting until you press a few buttons in the vehicle, typically on the steering wheel or door panel, or the central console. The sequence is determined by the user and can be altered as needed. Once the system is activated, it cannot be deactivated by thieves which makes it a great option for anyone looking to secure their vehicle from theft.
The system is designed not to be detectable by modern diagnostic tools and code-grabbing technologies. It also does not send out radio frequencies, which makes it even harder for thieves to detect the device.
If the device is discovered, it will stop the engine from running. It will also sound an alarm to scare the burglar away. The device can be used to track the location of the car, which can help police locate it if it is stolen.
If you're interested in a ghost immobiliser call the experts at Car Specalist Customs to get an estimate and discuss your options. We are able to install ghost immobilisers for your vehicle. We will make sure that it is concealed in a place that is difficult to reach. We can also install additional security measures, including a kill switch and wheel lock, to keep your vehicle safe from theft.
Disarming the System
If you own a Ghost immobiliser fitted to your vehicle, it's essential to know how to disarm it. This will assist you in the event that you lock your keys in the car or if your battery fails. The system uses an unique PIN code that only you know. It won't be able to start the car without this code. The simplest method to enter the code is to press a combination of buttons on your dashboard or the steering wheel. This is a lot easier than using a key fob, and stops others from copying your remote.
Ghost2 is noninvasive unlike other immobilisers from the aftermarket which require cutting wires to facilitate installation. It also works with the CAN bus system of your vehicle in order to function. Its standout feature is its ability to bypass the engine without affecting your vehicle's normal functions, making it difficult for thieves to use signal boosters or copy your car keys. It does not emit radio frequency, therefore thieves won't be able to detect it.
The Ghost system also has an option called Transport Mode which allows you to temporarily disable the security system for circumstances like transportation or servicing. This feature is useful for when you're loaning your vehicle out to someone else, without sharing your PIN number, or if your vehicle needs to be protected when you drive it. Press the button five times within two seconds to enable Transport Mode. The Ghost system will confirm activation by giving five indication signals.
Save the emergency code outside your vehicle in a safe place. In the event that you encounter a situation where you are locked out of your vehicle, you can contact the technician or the company who installed the system, and they'll give you the code. If you are unable to reach them then you can try to contact an authorized dealer however this will require verification procedures and could result in additional fees.
This system is not just convenient, but it can also help protect your vehicle from theft, and also reduce cost of insurance. Many insurance companies offer lower premiums or financial incentives to install this anti-theft system.